Buying a used car is a big decision, and most problems that show up after purchase could have been caught during a proper viewing. This is the checklist we follow.
1. Papers first
Make sure the licence matches the car: chassis number, engine number and colour. Any mismatch stops the viewing until it is explained.
2. Chassis
The most important item. Check front, rear and under the sills for welds, straightening or rust.
3. Paint
Compare panels with a paint thickness gauge and use a magnet on suspicious areas. A repaint is fine as long as you know where and why.
4. Cold engine
Ask to see the car before it has been started that day. A cold engine reveals noises, rough idle and smoke that can disappear once warm.
5. Exhaust smoke
Blue smoke can mean burning oil, constant white smoke can mean coolant in the engine. Both need a deeper check.
6. Gearbox
On automatics watch for jerks or delays in shifting. On manuals test the clutch and every gear.
7. Suspension and steering
Drive over a bump and listen for knocks. The car should track straight and the steering should return on its own.
8. Brakes
Brake firmly somewhere safe. The car should not pull to one side and the pedal should feel firm.
9. Fault codes
A diagnostic scanner reads stored codes even when no warning light is on. A small step that prevents big surprises.
10. Tyres, AC and electrics
Uneven tyre wear can point to alignment issues. Test the AC, windows, mirrors and all electrics.
Want someone experienced to do this with you, with the right devices? Message us on WhatsApp and we will help from wherever you are.
FAQ
What should I check first?
Papers and chassis. If either has a problem, the rest does not matter.
Can I inspect without devices?
You can spot a lot by eye, but devices reveal careful repaints and stored faults you cannot see.
Need someone to inspect a car?
WhatsApp us on 01123507335 and we will arrange everything.
Message us on WhatsApp